SUS316Lステンレス鋼の孔食電位および孔食成長挙動に及ぼす金属イオンの影響

書誌事項

タイトル別名
  • Effects of Metal Ions on Pitting Potential and Pit Growth Behavior for 316L Stainless Steel

この論文をさがす

説明

A potentiostatic method was used to measure pitting potential for SUS316L stainless steel and compared with a potentiodynamic polarization method standardized by JIS G 0577. Test conditions were sodium chloride solutions from 0.008 to 1 M containing metal ions less than 110 ppm at temperatures of 300 and 323 K. The pitting potentials of SUS316L steel decreased with the increases in concentration of chloride ions and in temperature. The test results of pitting potential were consistent between the potentiostatic and potentiodynamic polarization methods. The presence of metal ions in a 0.08 M sodium chloride solution greatly decreased the pitting potential of SUS316L steel. Pits were grown from a steel surface by using a galvanostatic method proposed in this study, and observed in a cross-sectional surface after the growth tests. As a results, it is found that the low current density or metal irons of Mn2+ and Cr3+ added in the sodium chloride solution changed the aspect ratio of cross-sectional pit morphology and promoted deeper pit growth. Mechanisms of pit initiation and growth were discussed in this study.

収録刊行物

  • 材料と環境

    材料と環境 61 (5), 213-218, 2012

    公益社団法人 腐食防食学会

参考文献 (7)*注記

もっと見る

詳細情報 詳細情報について

  • CRID
    1390282681234412928
  • NII論文ID
    130004503120
  • DOI
    10.3323/jcorr.61.213
  • COI
    1:CAS:528:DC%2BC38XhtVCls7fK
  • ISSN
    18819664
    09170480
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • Crossref
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ