書誌事項
- タイトル別名
-
- Heat transport capability of a flat shaped heat pipe.
- ヘイバンジョウ ヒート パイプ ノ ネツ ユソウ ゲンカイ
この論文をさがす
抄録
This paper describes an experiment and the analysis of the heat transport capability of a flat shaped heat pipe with a thickness of a few millimeter. Two types of heat pipes are investigated. One is a triangular channel heat pipe made of a column of triangular tubes with small leg height. The other one is a flat plate heat pipe with rectangular vapor space and axial grooves along the inside wall. The liquid recession in the liquid channel and the liquid pressure drop at the condenser end due to the capillary pressure of the liquid slug (slugging effect) were taken into consideration in the prediction of the heat transport capability. The prediction agreed well with the experimental data. The flat plate heat pipe with axial rectangular grooves had larger heat transport capability than the triangular channel heat pipe for the small slugging effect and the larger cross sectional area for the liquid return.
収録刊行物
-
- 日本機械学会論文集B編
-
日本機械学会論文集B編 54 (501), 1157-1162, 1988
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681240064128
-
- NII論文ID
- 110002401320
- 130004218535
-
- NII書誌ID
- AN00187441
-
- ISSN
- 18848346
- 03875016
-
- NDL書誌ID
- 3180496
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可