石炭液化触媒の設計

DOI Web Site 被引用文献1件

書誌事項

タイトル別名
  • Design of catalyst for liquefaction of coal.

抄録

Studies on the liquefaction of bituminous coal and lignite were made by employing as catalysts various kinds of complex oxides containing iron or molybdenum. Hydrocracking was performed using, as model substances of coal, diphenylmethane, diphenyl ether, and benzyl phenyl ether. To test the acidity and the hydrogenation activity of a catalyst, dehydration of 2-propanol and hydrogenation of naphthalene were carried out.<br>It was concluded that, based on the correlation between the activity for diphenylmethane and that for 2-propanol (Fig. 3) and on the correlation between the activity for benzyl phenyl ether and that for naphthalene (Fig. 4), the acidic properties of the catalyst played an important role in the C-C bond cleavage, and the hydrogenation activity of the catalyst played an important role in the C-O bond cleavage.<br>This conclusion was found to fit the results of liquefaction of bituminous coal of 83.0% carbon content and that of lignite of 72.3% carbon content. Namely highly acidic catalysts exhibited high activities for liquefaction of bituminous coal (Table 2), whereas catalysts possessing high hydrogenation ability showed high activities for liquefaction of lignite containing a large amount of oxygen (Table 4).<br>To prepare efficient catalysts for coal liquefaction, such factors, in addition to acidity and hydrogenation activity, as pore and particle sizes, support, complexing, and additive effects should be taken into consideration.

収録刊行物

  • 石油学会誌

    石油学会誌 29 (4), 280-288, 1986

    公益社団法人 石油学会

被引用文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ