Rapidly quenched Nd-Fe-B magnets.

DOI Web Site

Bibliographic Information

Other Title
  • 超急冷Ｎｄ－Ｆｅ－Ｂ磁石
  • チョウ キュウレイ Nd Fe B ジシャク

Search this article

Description

Over-quenched Nd-Fe-B flakes for isotropic bonded magnets show high coercivity (iHc) by post-heat treatment. This flake has the lowest temperature coefficient of iHc around -0.45/°C and the smallest grain size in the Nd-Fe-B materials. Enough thermal stability and magnetizability are obtained for isotropic bonded magnets with these characteristics of the flake. The Nd14Fe80B6 ternary composition has the best hot workability (die upsetting) from stress-strain curves for the initial stage of die upsetting at hot working temperatures. Alignment of c-axis along die upsetting direction is obtained, but decrease in iHc due to grain coarsening is resulted. Ga is the best for enhancing iHc without deterioration in hot workability. Typical magnetic properties of Nd14Fe79.25B6Ga0.75 die-upset magnets are (BH)max=36 MGOe and iHc=19 kOe. The iHc of powders made by pulverizing the die-upset magnet is nearly independent of particle size. Anisotropic bonded magnets are developed using this powder. Typical magnetic properties of Nd-Fe-B-Ga compression moulded magnets are (BH)max=15 MGOe and iHc=19 kOe.

Journal

Keywords

Details 詳細情報について

Report a problem

Back to top