Preparation of Pb-O, La-O, Zr-O, Ti-O Thin Films by Reactive Sputtering.

DOI Web Site Open Access
  • Maiwa Hiroshi
    Department of Materials Science and Ceramic Technology, Shonan Institute of Technology
  • Ichinose Noboru
    Department of Materials Science and Engineering, School of Science and Engineering, Waseda Univesity
  • Okazaki Kiyoshi
    Department of Materials Science and Ceramic Technology, Shonan Institute of Technology

Bibliographic Information

Other Title
  • 反応性スパッタリングによるＰｂ‐Ｏ，Ｌａ‐Ｏ，Ｚｒ‐Ｏ，Ｔｉ‐Ｏ薄膜の作成
  • ハンノウセイ スパッタリング ニ ヨル Pb O La O Zr O Ti O

Search this article

Description

Pb-O, La-O, Zr-O, Ti-O thin films were prepared by reactive rf-magnetron sputtering of metallic Pb, La, Zr and Ti target in an atmosphere of mixed gas of argon and oxygen. The deposition rate, crystal structure and optical properties of sputtered films were studied as a function of the partial pressure of oxygen (Po2). Total pressure was controlled to maintain a constant value of I Pa. The deposition rate of the films decreased remarkably when the partial pressure of oxygen exceeded a certain value. Generally, with the increase of the input power, the critical Po2 shifted to high pressure side. When films were deposited in higher Po2 than the critical, oxide thin films were prepared. From the measurement of optical emission spectra during sputtering, the formation of oxide on the surface of target was confirmed, resulting in the decrease of the deposition rate.

Journal

Keywords

Details 詳細情報について

Report a problem

Back to top