真空および(H2+N2)雰囲気中で焼結されたSUS304ステンレス鋼の腐食挙動

  • 砂田 聡
    富山大学大学院理工学研究部ナノ・新機能材料学域ナノマテリアル・システムデザイン学系
  • 山本 隆久
    富山大学大学院理工学研究科
  • 森本 耕一郎
    三菱マテリアルPMG(株)
  • 真島 一彦
    富山大学大学院理工学研究部ナノ・新機能材料学域ナノマテリアル・システムデザイン学系

書誌事項

タイトル別名
  • Corrosion Behavior of SUS304 Stainless Steel Sintered in Vacuum or Mixed Gas Atmospheres Composed of H2 and N2 with Various Compositions
  • シンクウ オヨビ H2 N2 フンイキチュウ デ ショウケツサレタ SUS304 ステンレスコウ ノ フショク キョドウ

この論文をさがす

抄録

Corrosion behavior of SUS304 stainless steels sintered in vacuum or (H2+N2) gas atmospheres with various compositions was studied by polarization curve measurement test, immersion test and 0.5 kmol·m−3 H2SO4 boiling test. The sintered density ratio of the SUS304 stainless steel specimen sintered in pure H2 gas was the highest, while it decreased with increasing N2 content in the (H2+N2) mixed gas. On the other hand, the specimen sintered in vacuum showed the second highest density ratio. And the linear relationship between sintered density ratio and N2 content was recognized. Both corrosion current densities at Ecorr and at 0.5 V in passivity state region showed the almost linear relationship against sintered density. The mass loss measured by immersion test also decreased linearly with an increase in sintered density, while that by 0.5 kmol·m−3 H2SO4 boiling test did not show the linear decrement though it decreased gradually with increasing sintered density.

収録刊行物

参考文献 (7)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ