書誌事項
- タイトル別名
-
- Effect of Characteristics of Powder on Mechanical Properties of SUS304L Sintered Compacts by Metal Injection Molding.
- キンゾク フンマツ シャシュツ セイケイホウ ニヨル SUS304L ショウケ
この論文をさがす
抄録
The effect of characteristics of powder on mechanical properties of sintered SUS304L compacts made by injection molding was investigated. The specimens were made by injecting the mixture of water atomized or gas atomized powder and a polyamide binder into a metallic mold. The compacts were debound in air and sintered in vacuum at the various temperatures between 1573K and 1673K for 7.2ks. The relative densities of the sintered gas atomized powder compacts were higher than those of the sintered water atomized powder compacts. Some amount of oxide was found to exist in the microstructure of sintered water atomized powder compacts. The tensile strength and elongation of sintered gas atomized powder compacts were higher than those of sintered water atomized powder compacts mainly because of their relatively higher densities. The highest density of all was 70%. On the other hand, the proof stress and hardness of the sintered water atomized powder compacts were higher because of the existence of oxides.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 44 (5), 427-431, 1997
一般社団法人 粉体粉末冶金協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681284090240
-
- NII論文ID
- 10002013796
-
- NII書誌ID
- AN00222724
-
- COI
- 1:CAS:528:DyaK2sXktVOnsrY%3D
-
- ISSN
- 18809014
- 05328799
- http://id.crossref.org/issn/05328799
-
- NDL書誌ID
- 4205761
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可