アルミニウム偏平粉末の特性に及ぼすミリング条件の影響

DOI Web Site 参考文献11件

書誌事項

タイトル別名
  • Effect of Milling Conditions on Characteristics of Al Flake Powder.
  • アルミニウム ヘンペイ フンマツ ノ トクセイ ニ オヨボス ミリング ジョウ

この論文をさがす

抄録

Tumbler-ball milling of Al powder was carried out to investigate the effect of milling conditions on the characteristics of Al flake powder particles for fingerprint detection. Initial powder of under 25μm was more easily developed to flake particles have high specific surface area than under 19μm one. With an increase in the ball size from 4.8 to 16mm, the specific surface area of the milled powder particles increases and then decreases at 16mm. The specific surface area of the milled powder particles increased with increasing mill container rotation speed. The excellent fingerprint detection qualities were obtained in milling condition of under 25μm initial powder, 9.5mm ball size, 80rpm mill container rotation speed and 40 hours milling time. The diameter of the flake particles estimated from the impact velocity of the balls based on the milling ball dynamics and the Hertz contact theory was compared with the measured one.

収録刊行物

参考文献 (11)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ