書誌事項
- タイトル別名
-
- Tool Wear of (Ti, W, Si) N Coated Cemented Carbide
- Ti W Si N コーテッド チョウコウゴウキン ノ コウグ マモウ
この論文をさがす
抄録
In this study, the tool wear was experimentally investigated in order to clarify the effective tool material for the turning of SCr420H. SCr420H was turned with three kinds of physical vapor deposition (PVD) coated cemented carbide tools. The coating films used were TiN, (Ti, Al)N, (Ti, W)N and (Ti, W, Si)N coating film. (Ti, W, Si)N is a new type of coating film. The main results obtained are as follows: (1) The (Ti, W, Si)N coating film has both high hardness and high critical scratch load. (2) In the turning of SCr420H, the wear progress of the (Ti, W, Si)N coated cemented carbide tool is slowest.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 54 (6), 405-409, 2007
一般社団法人 粉体粉末冶金協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681284923648
-
- NII論文ID
- 130000058003
-
- NII書誌ID
- AN00222724
-
- COI
- 1:CAS:528:DC%2BD2sXntFKqsrY%3D
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 8875403
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可