書誌事項
- タイトル別名
-
- Production of Cu/Fe clad strip by powder rolling
- フンマツ アツエンホウ ニ ヨル Fe-Cu クラッドバン ノ セイゾウ
この論文をさがす
説明
To attempt a direct production of Cu/Fe clad strips from the powder materials, several factors in the rolling process, by using a newly designed hopper, were investigated, and also mechanical properties of clad strips fabricated in various conditions were examined.<BR>The results obtained were summarized as follows:<BR>(1) With decreasing the tip angle and height of a separator and particle size of powders, the asperities of Cu/Fe strip boundary became smooth.<BR>(2) Because of setting the separator in the hopper, the powder head gave no effect to the thickness and density of strips.<BR>(3) Effects of the roll-speed and roll-gap on the thickness and density of strips were similar to those in the rolling for single powders.<BR>(4) The tensile strength of sintered, cold rolled and annealed strips was of 28 kg/mm2, which was about 6 times as strong as that of the strip as-sintered at 1000°C.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 20 (1), 10-15, 1973
一般社団法人 粉体粉末冶金協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681284970496
-
- NII論文ID
- 130000816741
-
- NII書誌ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 7641939
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可