二ホウ化チタン基サーメットの結合剤に関する実験

DOI Web Site

書誌事項

タイトル別名
  • Effect of Binder on the properties of TiB2 Based Cermets
  • ニホウカ チタンキ サーメット ノ ケツゴウザイ ニ カンスル ジッケン

この論文をさがす

抄録

This paper describes the effect of binder on properties of TiB2 based cermets. The used binders are Ni4B3, Co-Cr-B alloy, WB, Mo, NbB, Tall, NiB, CrB, CoB, AlB2, TaB2, AlB2-Ni·P, TaB2-Ni·P, CrB2-Ni·P, ZrB2-Ni·P W-Ni·P, and Mo-Ni·P. The results are as follows:<BR>1) Ni4B3 and NiB are good binders for TiB2 based cermets. Binding phase of TiB2-NiB sintered compact contains NiB, Ni4B3 and unknown phase. This Ni4B3 may combine with TiB2 particle.<BR>2) TiB2-10%CrB2-1%Ni·P sintered compact has the bending strength of 40-56kg/mm2 and is almost free of pores. It is likely that Ni·P acts an important parts of good sintering.<BR>3) TiB2-10%CoB and TiB2-5%Mo-1%Ni·P sintered compact has the bending strength of 50-60kg/mm2.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ