Effect of Graphite Properties on Dimensional Change of Fe-Based Powder Compacts during Sintering.
-
- Takata Jinsuke
- Kobe Steel Ltd.
-
- Kawai Nobuyasu
- Kobe Steel Ltd.
Bibliographic Information
- Other Title
-
- 鉄系圧粉体の焼結時の寸法変化におよぼす黒鉛の特性の影響
- テツケイ アップンタイ ノ ショウケツジ ノ スンポウ ヘンカ ニ オヨボス
Search this article
Description
The effect of graphite properties on the dimensional change of Fe-2mass% Cu-0.8mass%C-0.75mass% zinc stearate was examined by using two kinds of natural graphite, flaky graphite of 0.5-35μm and amorphous graphite of 3-9μm. The compacts were sintered in endogas. Their sintering behaviors were correlated with the properties of graphite.<BR>As the size of graphite decreased, the compacts shrank and the dimensional change varied according to 0.27 log(B/A)% when graphite was replaced from A to Bμm. Finely divided flaky graphite showed a rapid carburization, which led to the acceleration of sintering and the suppression of copper growth. When flaky graphite was divided to 0.5μm, however, the dimensional change did not obey above formula at all. In this case, the compact expanded at the temperature ranging from about 150 to 450°C and the carburizing rate markedly decreased above 970°C, with a large fraction of the graphite remaining after sintering. Amorphous graphite of 9μm also showed a similar expansion in the early sintering stage, but the carburizing rate did not decrease. Such behaviors led to a remarkable shrinkage by liquid generation due to the ternary monotecto-eutectic reaction above the melting point of copper.
Journal
-
- Journal of the Japan Society of Powder and Powder Metallurgy
-
Journal of the Japan Society of Powder and Powder Metallurgy 43 (3), 383-389, 1996
Japan Society of Powder and Powder Metallurgy
- Tweet
Details 詳細情報について
-
- CRID
- 1390282681285795840
-
- NII Article ID
- 10002011749
-
- NII Book ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL BIB ID
- 3936710
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed