書誌事項
- タイトル別名
-
- Microstructure of Highly Adhesive TiN-Ti(C, N)-bonding layer-a-Al2O3 Films Coated by CVD on Cemented Carbide Cutting Tools.
- コウミッチャクセイ アルファーAl2O3 マク ヒフク セッサク コウグ ノ ミクロ ソシキ
この論文をさがす
抄録
The microstructure of highly adhesive CVD coated α-Al2O3 films on cemented carbide cutting tool inserts have been investigated. These inserts are coated with a TiN layer, a MT(moderate temperature)-Ti(C, N) layer, a bonding layer, and a α-Al2O3 layer by using CVD.<BR>SEM, TEM, and TEM-EDX were used to characterize the coatings, and following characteristics were found.<BR>(1) The bonding layer is composed of Ti, C, N, and O or of Ti, C, and O. Its crystal structure is a face centered cubic one with a lattice parameter of 0.431nm.<BR>(2) Each grain in the bonding layer continues crystallographically from the MT-Ti(C, N) layer grains.<BR>(3) There are crystalline planes running between a grain of the bonding layer and a grain of the a-Al2O3 layer.<BR>(4) Vertical-plane-shape projections are formed on the surface of bonding layer.<BR>The last three characteristics are considered to be the cause for improved α-A12O3 layer adherence and longer tool life.<BR>A crystallographical model shows that the above mentioned microstructure is consistent to X-ray diffraction result which shows the (110) plane of α-Al2O3 layer is oriented to the parallel of the insert's surface.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 46 (4), 422-426, 1999
一般社団法人 粉体粉末冶金協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681285991680
-
- NII論文ID
- 10002262351
-
- NII書誌ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 4701645
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可