Ni‐Cr‐Mo‐B系ガスアトマイズ粉末の複硼化物生成挙動に及ぼすCr,Mo量および熱処理の影響

書誌事項

タイトル別名
  • Effects of Chromium and Molybdenum Contents and Heat Treatment on Behavior of Complex Boride Forming in Ni-Cr-Mo-B Gas Atomized Powder
  • Ni-Cr-Mo-B系ガスアトマイズ粉末の複硼化物生成挙動に及ぼすCr,Mo量および熱処理の影響
  • Ni Cr Mo Bケイ ガスアトマイズ フンマツ ノ フクホウカブツ セイセイ キョドウ ニ オヨボス Cr Moリョウ オヨビ ネツ ショリ ノ エイキョウ

この論文をさがす

抄録

The effects of Cr and Mo contents and the heat treatment on the properties of gas atomized powders with Ni-Xmass%Cr-Ymass%Mo-1.5mass%B compositions ((X, Y)=(10, 36), (22, 26), (34, 16)) were investigated. Examined powders were produced by gas atomization, followed by sieving under 150 μm. These powders were heat treated at various temperatures to investigate its effect.<BR>As a result, tetragonal M3B2 and tetragonal M5B3 type complex borides were observed in examined powders before and after heat treatment. Compositions and crystal structures of complex borides varied depending on Cr and Mo contents in examined powders and compositions of Ni-based matrix phases also varied. Vickers hardness after 1473 K heat treatment increased with increasing the Mo/Cr ratio of examined powder.

収録刊行物

被引用文献 (5)*注記

もっと見る

参考文献 (8)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ