書誌事項
- タイトル別名
-
- Mechanical Characteristic of Spark Plasma Sintered Composite Material Using Carbonized Bagasse and Ti Powder
- タンカ バガス ニ チタン フンマツ オ フクゴウカ シタ ホウデン プラズマ ショウケツタイ ノ リキガクテキ トクセイ
この論文をさがす
説明
Bagasse is a by-product obtained from squeezed sugar cane. In this study, composite materials were fabricated from powder mixtures of carbonized bagasse and Ti, using spark plasma sintering (SPS). This achieves effective use of bagasse and mechanical strength improvement of carbon ceramics. TiC was synthesized by a chemical reaction between the carbon in carbonized bagasse and Ti powder during SPS. The flexural strength of the composite material fabricated by SPS was maximum at a Ti content of 1 vol.%, and decreased with increasing Ti content above 1 vol.%. The flexural strength of the composite material containing 3 vol.% Ti powder was significantly lower than that of the composite containing 1 vol.% Ti powder. Next, the mechanical properties of the composite materials were investigated using the finite element method (FEM) to examine crack propagation. FEM result suggests that crack coalescence in the composite material occurs during flexural deformation, because of the decrease in the distance between TiC particles as a result of the increased Ti content of the composite material.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 62 (5), 234-242, 2015
一般社団法人 粉体粉末冶金協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681288234112
-
- NII論文ID
- 130005074109
-
- NII書誌ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 026437985
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可