書誌事項
- タイトル別名
-
- Rolling Contact Fatigue and Scuffing of Surface Modified Rollers. In Case of Electroless Ni-P Alloy Plated Rollers and Sulfurized Rollers.
- ヒョウメン カイシツ ローラ ノ コロガリ ツカレ ト スカッフィング ムデン
この論文をさがす
抄録
The influence of the surface modification treatment on the rolling contact fatigue and the scuffing capacity of rollers was examined by two cylinder test under oil lubrication. The surfaces of test rollers were modified by the electroless Ni-P alloy plating and the sulfurizing. The rolling contact fatigue strength and the scuffing capacity of the surface modified rollers were larger than those of the non-coated rollers. In the fatigue test the failure mode of both the surface modified rollers and the non-coated rollers was the spalling caused by subsurface cracking. The friction coefficient of the Ni-P plated rollers was smaller than that of the non-coated rollers, and the surface roughnesses of the modified rollers were decreased with increasing wear of modified layers. The small friction coefficient and the small roughness contribute to the improvement of the scuffing capacity, and moreover they might reduce the surface contact stresses and the rolling contact fatigue strength might be improved.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 64 (621), 1801-1807, 1998
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681303970688
-
- NII論文ID
- 110002383755
- 130004232744
-
- NII書誌ID
- AN00187463
-
- COI
- 1:CAS:528:DyaK1cXksFWisbo%3D
-
- ISSN
- 18848354
- 03875024
-
- NDL書誌ID
- 4481273
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可