書誌事項
- タイトル別名
-
- The Experimental and Analytical Evaluation of High Speed Bevel Gears.
- コウシュウソクマガリ ハ カサハグルマ ノ ドウ カジュウ ヒョウカ
この論文をさがす
抄録
To reduce the size of reduction gears where big power is transmitted through crossed shafts, it is necessary to increase rotational speed and decrease the transmitted torque and load. To know dynamic behaviour of high speed bevel gears, the experiments were carried out and tooth root stress and temperature were measured. Also a spiral bevel gear set analysis has been developed that makes use of mesh stiffness calculations based on finite-element methods. The analysis enables the calculation of dynamic loads. And then, the following results were obtained. (1) A power absorbing gear testing machine (960 kW) could be operated up to high pitch line velocity (∼110 m/s) and it is found that dynamic loads is nine times as much as static loads under the condition of 110 m/s. (2) Analytical results of dynamic load agreed with the experimental results. It was confirmed that the analytical method has practical accuracy and usefulness.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 65 (629), 283-290, 1999
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681304023168
-
- NII論文ID
- 130004233157
- 110002384638
-
- NII書誌ID
- AN00187463
-
- ISSN
- 18848354
- 03875024
-
- NDL書誌ID
- 4641014
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可