-
- TAKAHASHI Tomoshi
- Department of Metallurgical Engineering, Niihama Technical College
-
- KATO Michitomo
- Department of Metallurgical Engineering, Niihama Technical College
Bibliographic Information
- Other Title
-
- Al‐Pb‐Cu焼結合金の諸性質
- Al Pb Cu ショウケツ ゴウキン ノ ショ セイシツ
Search this article
Abstract
The basic properties of sintered Al-10% Pb-1-6% Cu alloys such as dimensional change, sintered density, hardness and radial crushing strength were examined. The compacts expand during sintering at 540°to 610°C in the purified hydrogen atomsphere because of pore generation at the eutectic temperature of the Al-Cu system and formation of a liquid Pb phase. This expansion shall also be considered from the viewpoint of evolution and expansion of gases absorbed in the liquid phase. The suitable Cu content 4% and the optimum temperature and time for sintering respectively about 580°C and 2hr are recommended on the basis of the combination of basic properties of the alloys sintered under pressure 1ton/cm2.
Journal
-
- Journal of Japan Institute of Light Metals
-
Journal of Japan Institute of Light Metals 29 (10), 431-436, 1979
The Japan Institute of Light Metals
- Tweet
Details 詳細情報について
-
- CRID
- 1390282681311841024
-
- NII Article ID
- 130004208045
-
- NII Book ID
- AN00069773
-
- ISSN
- 18808018
- 04515994
-
- NDL BIB ID
- 2065840
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed