Friction coefficient between die and casting in aluminum alloy die casting.
-
- AOYAMA Shunzo
- Ahresty R&D Corporation
-
- SUNADA Masahiro
- Ahresty R&D Corporation
-
- SAKAMOTO Katsumi
- Ahresty R&D Corporation
-
- UMEMURA Teruyoshi
- Nagaoka University of Technology
Bibliographic Information
- Other Title
-
- アルミニウム合金ダイカストの鋳物と金型の間の摩擦係数
Abstract
An apparatus has been developed to measure the friction coefficient between the die and the casting at the time of ejection in die casting. The measurement was achieved by measuring the force when a test plate was pulled perpendicularly after the aluminum alloy was shot under high pressure condition. The effects of injection condition, hardness of castings, state of die surface, and spraying condition of lubricants have been discussed and examined. The friction coefficient was very high (1.0-2.0) in the case of non-lubrication, and it decreased as hardness of castings increased and roughness of die surfaces decreased. The friction coefficient decreased and then became constant (0.2-0.3) with increasing in the amount of layers of lubricants.
Journal
-
- Journal of Japan Institute of Light Metals
-
Journal of Japan Institute of Light Metals 41 (6), 412-418, 1991
The Japan Institute of Light Metals
- Tweet
Details 詳細情報について
-
- CRID
- 1390282681312334080
-
- NII Article ID
- 130004209121
-
- ISSN
- 18808018
- 04515994
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed