Al‐Ti母合金添加による純アルミニウム鋳塊の凝固組織の微細化機構について

書誌事項

タイトル別名
  • Grain refining mechanism of pure aluminum by addition of Al-Ti master alloy
  • Al Ti ボ ゴウキン テンカ ニヨル ジュン アルミニウム チュウカイ ノ

この論文をさがす

抄録

Molten aluminum containing a grain refiner was cast into a metallic mold. The solidified castings have an equiaxed structure. When the castings are then remelted and unidirectionally solidified from the bottom, three types of structures, only columnar, equiaxed at the bottom and top, and entirely equiaxed crystals are formed. If such ingots are remelted again and cast into the metallic mold, the solidified structure is of equiaxed. Primary particles of TiAl3 in Al-Ti master alloy promote formation of equiaxed crystals only when they remain in the melt during pouring as fine particles. Dissolved titanium in the melt always acts as a grain refiner, if the melt is disturbed sufficiently to ensure separation of the necked shape crystals from the mold wall.

収録刊行物

  • 軽金属

    軽金属 31 (6), 415-421, 1981

    一般社団法人 軽金属学会

被引用文献 (7)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ