書誌事項
- タイトル別名
-
- The effect of sheet characteristics on disarrangement of aluminum fins in the heat exchanger of room air conditioner.
- クウチョウヨウ ネツコウカンキ ノ フィンピッチ ミダレ ニ オヨボス フィンザイ トクセイ ノ エイキョウ
この論文をさがす
説明
To cope with the disarrangement of aluminum fins (called “Avec”) which occasionally occurs during the expansion process of copper tubes in the heat exchanger of room air conditioners, the effects of the mechanical properties, the thickness and the surface treatments of the aluminum fin stock on avec were investigated. These results are summarized as follows. (1) For avec, the compressive load on the fins at the unexpanded part of the heat exchanger, due to shrinking of the copper tube by the expansion, has a great influence on avec. When the compressive load on the fins is within the range for the fin shape, avec occurs. (2) The friction coefficient of the fin's surface treatment significantly affects the compressive load on the fins. By using a surface treatment having a very low friction coefficient, the compressive load can be sufficiently reduced to prevent avec. (3) The effect of the mechanical properties on avec have not been determined. The fin thickness has a small influence on avec. By using thicker fins, the occurrence of avec could be slightly reduced.
収録刊行物
-
- 軽金属
-
軽金属 50 (2), 54-59, 2000
一般社団法人 軽金属学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681314185984
-
- NII論文ID
- 10004548559
-
- NII書誌ID
- AN00069773
-
- COI
- 1:CAS:528:DC%2BD3cXivVWntL4%3D
-
- ISSN
- 18808018
- 04515994
-
- NDL書誌ID
- 5283202
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可