ＳｉＣｐ／Ａｌ‐Ｔｉ合金溶湯間反応によるｉｎ　ｓｉｔｕＴｉＣｐ／アルミニウム複合材料の製造と機械的性質

DOI Web Site 被引用文献8件

書誌事項

タイトル別名
  • Fabrication and mechanical properties of in situ TiCp/Al composites by the interfacial reaction between SiCp and liquid Al-Ti alloy.
  • SiCp Al Ti ゴウキン ヨウトウカン ハンノウ ニ ヨル in sit

この論文をさがす

説明

A novel technique has been developed for fabricating in situ formed TiCp/Al composites. In this process, fairly stable TiC particles were in situ synthesized in liquid aluminum by the interfacial reaction between an Al-Ti melt and SiC, which is a comparatively unstable carbide from the view-point of thermodynamics. It is possible in the present process to generate TiC particles of nearly 1μm in diameter, even utilizing SiC of 14μm as raw material. However, the dispersion behavior of TiC particles in the matrix depends on the size of the raw material SiC. Decomposing finer SiC makes the dispersion of_TiC particles more uniform and the mechanical properties of composites are improved accordingly. The structure of in situ composites and their mechanical properties are affected by the fabrication temperature and the stirring time. It has been found that the most suitable condition for fabrication should be applied depending on the size of the raw material, even if the same kinds of carbide are used. Furthermore, although Al-Ti-Si system intermetallic compounds were detected in a TiCp/Al-Si composite which was fabricated by conventional melt stirring method, these compounds can not be observed in a TiCp/Al-Si composite made by this in situ production method. Hence, the mechanical properties of the in situ TiCp/Al-Si composite are superior to those of the conventional TiCp/Al-Si composite.

収録刊行物

  • 軽金属

    軽金属 43 (3), 152-158, 1993

    一般社団法人 軽金属学会

被引用文献 (8)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ