Al-Zn-Mg合金の応力腐食割れ性の方向性におよぼす微量添加元素の影響

DOI Web Site 被引用文献5件

書誌事項

タイトル別名
  • Effects of small amounts of additional elements on directionality of stress corrosion resistance of the Al-Zn-Mg alloys
  • Al-Zn-Mg ゴウキン ノ オウリョク フショク ワレ セイ ノ ホウコウセイ ニ オヨボス ビリョウ テンカ ゲンソ ノ エイキョウ

この論文をさがす

抄録

Effects of small additions of Fe, Si, Cu, Mn, Cr, Ti, Zr and Ag on stress corrosion cracking in the LT-direction and shear cracking of Al-Zn-Mg alloys were investigated with a special consideration of grain shape.<br>(1) Additions of Si, Cu, and Ag increased stress corrosion resistance in both LT- and ST-directions, while Mn, Cr and Zr additions increased stress corrosion resistance in the LT-direction but decreased that in the ST-direction. Effects of Fe and Ti additions on stress corrosion resistance were small.<br>(2) It was found that Fe, Mn, Cr, Ti and Zr additions affected stress corrosion resistance only through their effect on grain shape. However, additions of Si, Cu and Ag increased stress corrosion resistance through some other effects than that on grain shape. It was considered that a Si addition was effective through reduction of solute concentrations and Cu and Ag additions were effective by introducing changes in electrochemical properties of grain boundary regions.<br>(3) Effects of Fe, Si and Cu additions on shear cracking had the same tendency as that on stress corrosion cracking in the ST-direction. However, effects of Cr, Mn and Zr additions on shear cracking corresponded to that on stress corrosion resistance in the LT-direction rather than in the ST-direction. These observations were explained by occurrence of metal flow due to shearing and existence of directionality of stress corrosion resistance.

収録刊行物

  • 軽金属

    軽金属 23 (5), 210-217, 1973

    一般社団法人 軽金属学会

被引用文献 (5)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ