書誌事項
- タイトル別名
-
- Effect of anodic oxide coating on bonding strengths and damping properties of magnesium and titanium alloys
- マグネシウム ゴウキン ト チタン ゴウキン ノ セッチャク キョウド ト シンドウ ゲンスイ トクセイ ニ オヨボス ヨウキョク サンカ ショリ ノ エイキョウ
この論文をさがす
説明
In this study, effects of the anodizing condition on the bonding strength and the damping properties of the bonding specimen were investigated. The specimens bonded Ti–6Al–4V alloys to AZ31 magnesium alloys with epoxy resin adhesives were used. A porous anodic oxidation film of about 4 μm thickness was formed on the Ti–6Al–4V alloy surfaces by anodizing. The Vickers hardness of anodized Ti–6Al–4V alloy specimen was increased two times higher than that of non-treated specimen. And then, the bonding strength measured by the adhesion tester was also increased. The damping characteristics of bonded specimen were examined through experiments of the collision sound and the reaction velocity of pendulum. As a result, in comparison to the no-treated specimen, the damping performances of anodized Ti–6Al–4V titanium alloy specimens were increased and restitution coefficients of that were decreased. On the other hand, the tonal component of the AZ31 magnesium alloy was reduced in the lower register below 1 kHz. It was also demonstrated that the damping performance of the bonding specimen was improved depending on the anodic oxide coating and adhesive.
収録刊行物
-
- 軽金属
-
軽金属 61 (10), 513-517, 2011
一般社団法人 軽金属学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681316288896
-
- NII論文ID
- 10030513980
-
- NII書誌ID
- AN00069773
-
- COI
- 1:CAS:528:DC%2BC3MXhsVehur%2FL
-
- ISSN
- 18808018
- 04515994
-
- NDL書誌ID
- 11284585
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDLサーチ
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可