鋳塊の押出性に及ぼす析出処理の影響

書誌事項

タイトル別名
  • Effeet of precipitation heat treatment on extrudability of ingtos of 6063 alloy
  • チュウコン ノ オシダシセイ ニ オヨボス セキシュツ ショリ ノ エイキョウ

この論文をさがす

抄録

Extrusion tests were carried out on 6063 alloy ingots in which Mg2Si particles were precipitated by isothermal precipitation treatment or by slow cooling after homogenizing. Extrudability of ingots was estimated by the extrusion pressure, the critical extrusion rate to cause tearing on the surface of extrusions and mechanical properties of extrusions. The principal results obtained are summarized as follows.<br>(1) Coarse particles of Mg2Si, particularly precipitated at about 400°C, reduce the extrusion pressure.<br>(2) Such coarse particles are the cause of tearing, thus, reduce the critical extrusion rate.<br>(3) Coarse particles of Mg2Si, particularly precipitated by slow cooling from homogenizing temperature, can not be disolved completely during extrusion process, and thus reduce tensile strength of extrusions after artificial aging.

収録刊行物

  • 軽金属

    軽金属 26 (7), 327-335, 1976

    一般社団法人 軽金属学会

被引用文献 (3)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ