書誌事項
- タイトル別名
-
- Study on a ball screw type damper with a vertically oscillating governor.
- チョッコウ シンドウガタ チョウソクキツキ ボール ネジシキ ボウシンキ ノ
この論文をさがす
抄録
This paper deals with the forced nonlinear vibration, its stability and the effects of vibration isolation of a new type of mechanical damper, which is attached to a single-degree-of-freedom-system, theoretically, experirnentally and by means of digital simulation. The damper which is composed of a ball screw, a flywheel and a vertically oscillating governor is further simplified in its structure and is more effective in suppressing the resonance of the primary system as compared with the former type which uses a flyball governor instead of the vertically oscillating governor. The results may be summarized as follows: (1) Resonant amplitude of the primary system may be fairy decreased by the oscillation of the 90vernor. (2) The nonlinear solution differs from the linear one which is solved by regarding the 90vernor as a flywheel. (3) Stable solutions for the primary system and the governor are obtained when the forcing frequency is lower than the natural frequency of the governor. (4) Theoretical results agree well with the simulated values. (5) Effects of vibration isolation of the damper are also verified experimentally.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 54 (499), 610-616, 1988
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681332507776
-
- NII論文ID
- 130004082132
- 110002390689
-
- NII書誌ID
- AN00187463
-
- ISSN
- 18848354
- 03875024
-
- NDL書誌ID
- 3177385
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可