多孔質ゴムと剛体面間に形成されるスクイズフィルムに関する研究　第１報　　粘弾性連続体モデルを用いた解析

DOI Web Site Web Site 被引用文献1件 参考文献10件

書誌事項

タイトル別名
  • A Study on Squeeze Films between Porous Rubber Surface and Rigid Surface. 1st Report, Analysis with Visco-Elastic Continuum Model.
  • タコウシツ ゴム ト ゴウタイメン カン ニ ケイセイ サレル スクイズ フィルム ニ カンスル ケンキュウ ダイ1ポウ ネンダンセイ レンゾクタイ モデル オ モチイタ カイセキ

この論文をさがす

抄録

Squeeze film effect between a porous surface and a rigid surface is investigated as a problem of visco-elastic hydrodynamic lubrication (VEHL). An axisymmetric continuum model is introduced based on a three element visco-elastic model to estimate the deformation of a cylindrical porous rubber block. The coefficients in the visco-elastic constitutive equation are experimentally determined and the deformation is calculated by FEM. To take into consideration the fluid inertia effect in the squeeze film, the approximate solutions for the film pressure are obtained from the Navier-Stokes equation and the continuity equation using the perturbation method. The squeeze-film pressures and forces are measured under the sinusoidal squeezing motion with a cylindrical porous rubber block. The difference between the VEHL solutions and the EHL (elastohydrodynamic lubrication) solutions becomes more marked for a higher frequency of squeeze oscillation due to the effect of viscoelasticity of the porous rubber. Hence, the VEHL solutions correspond better to the measured results and yield a smaller surface deformation of the porous rubber block than the EHL solutions as the frequency of squeeze oscillation increases.

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (10)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ