Development of Monitoring System of Machining Process by Using Frequency of Cutting/Machinery Sounds. 1st Report. Construction of the System to Cutting Tool Conditions by Expression of Hexadecimal Spectrum Pattern (HSP).

DOI Web Site Web Site 10 References

Bibliographic Information

Other Title
  • 機械音スペクトルの出現頻度を用いた加工工程監視システムの開発　第１報　　１６進数化スペクトルパターン（ＨＳＰ）表示による工具状態監視システムの構築
  • キカイオン スペクトル ノ シュツゲン ヒンド オ モチイタ カコウ コウテイ カンシ システム ノ カイハツ ダイ1ポウ 16シンスウカ スペクトルパターン HSP ヒョウジ ニ ヨル コウグ ジョウタイ カンシ システム ノ コウチク

Search this article

Abstract

Machining sounds has been told to be effective for monitoring of cutting tool conditions, but it has been difficult to avoid misunderstanding of the conditions in previous systems. There are two main causes. First, the peculiar sound to a condition dose not emanate continuously and an unexpected sound emanates occasionally. Secondly, in case of tool wear, the small difference between normal tool and tool wear makes the recognition of the wear hard. We propose the HSP (Hexadecimal Spectrum Pattern) as the definite expression of the spectrum patterns in this paper. And we also propose the new monitoring system by using the frequency of sound, which is applied by neural network, because we consider that the emanating time of the peculiar sound is as important as the spectrum pattern of it to recognize the condition exactly. In this system, cutting tool conditions, like normal, wear and fracturing, can be monitored without misunderstanding under a few cutting conditions.

Journal

References(10)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top