書誌事項
- タイトル別名
-
- Study on the production of high quality nickel-base superalloy melting stocks.
- コウ ヒンシツ ニッケルキ チョウゴウキン メルティング ストック ノ ヨウセ
この論文をさがす
抄録
Fundamental experiments were performed on the production of high quality melting stocks, and the following results were obtained.<br>(1) CaO lining is more favorable than MgO or Al2O3 lining to attain low [O] level in melting Al, Ti-bearing nickel base superalloys.<br>(2) Nitrogen desorption rate under high vacuum (4×10-3Torr) is 1.7-2.7 times as large as the one under low vacuum (1×10-2Torr).<br>(3) The lower the refining temperature is, the lower [O] level is attained in vacuum refining of Al, Ti-bearing nickel base superalloys.<br>(4) By using the nozzle of 20mmID×120mm, it is possible to avoid the contact between casting stream and the inside wall of mold.<br>Based on the above-mentioned results, TMD-5 nickel base superalloy melting stocks with [S], [O], [N]≤10ppm, respectively, were produced in 2 ton VIF under the condition of CaO lining, high vacuum refining (4×10-3Torr), low temperature refining after addition of reactive elements and optimization of tundish-nozzle size (20mmID×120mm).
収録刊行物
-
- 電気製鋼
-
電気製鋼 58 (1), 28-35, 1987
大同特殊鋼株式会社
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681362961280
-
- NII論文ID
- 130000743477
-
- NII書誌ID
- AN00152276
-
- ISSN
- 18834558
- 00118389
-
- NDL書誌ID
- 3120246
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可