書誌事項
- タイトル別名
-
- Bolt Loosening Monitoring Using Thin Plate Sensor (Natural Frequency Evaluation Using Oscillator Circuit)
- Natural Frequency Evaluation Using Oscillator Circuit
- 発振回路を用いた固有振動数評価
抄録
Bolted joints are commonly used for many machines and structures. They sometimes suffer from bolt loosening and may sometimes induce accidents. Therefore, bolt loosening detection techniques are essential for many machines and structures having bolted joints. Authors have proposed a new bolt loosening detection sensor using a specific natural frequency of a thin plate and named it thin plate sensor. The natural frequency of the sensor is identified by admittance of piezoelectric elements attached to the plate without human commitments. However, this method requires a complicated setup consisting of a function generator, a voltage-current measurement circuit, A/D converters and a computer with data processing software. In this paper we propose a method to evaluate the natural frequency using an oscillator circuit as an easier means. The oscillator circuit consists of an amplifer and a feedback circuit. The feedback circust consists of a capacitor, piezoelectric elements of the thin-plate sensor and CR low-pass filters. The oscillating frequency of the circuit is automatically synchronized with the natural frequency of the plate. Experiments are conducted to measure the relation between axial tension of the bolt and the oscillating frequency and the validity of the present method is confirmed.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 71 (710), 2983-2988, 2005
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681363037312
-
- NII論文ID
- 130004084739
-
- ISSN
- 18848354
- 03875024
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可