温間加工した炭素鋼の機械的性質におよぼす結晶粒度および温間加工条件の影響

DOI Web Site

書誌事項

タイトル別名
  • Effect of Grain Size and Warm Working Condition on Mechanical Properties of Warm Worked Carbon Steels
  • オンカン カコウシタ タンソ コウ ノ キカイテキ セイシツ ニ オヨボス ケ

この論文をさがす

抄録

A study has been made on the effects of grain size on flow stress and reduction in area at elevated temperature of 600 to 900°C and the effects of grain size and warm working conditions on mechanical properties at the room temperature of carbon steels, S45C and S55C.<br>The results obtained are as follows.<br>(1) The flow stress and the reduction in area at elevated temperature below Ac1 are influenced by initial grain size, i.e. fine grained steel shows high reduction in area and low flow stress. At higher temperature than Ac3, on the other hand, the effect of initial grain size on these properties are scarcely confirmed.<br>(2) The steel extruded at 750°C shows the optimum combination of strength and toughness. Furthermore, the mechanical properties at room temperature of this steel extruded at 800 and 850°C are controlled by grain size as warm extruded condition. With refining grain size, mechanical properties like 0.2% proof stress, elongation, reduction in area, and Charpy impact value increase.<br>(3) To obtain the finer grain in extruded condition, there seems to be a critical initial grain size under which finer grain is attained in extruded condition.

収録刊行物

  • 電気製鋼

    電気製鋼 55 (2), 121-130, 1984

    大同特殊鋼株式会社

詳細情報 詳細情報について

問題の指摘

ページトップへ