書誌事項
- タイトル別名
-
- Feature Extraction of Pb Free Solder Fillet Profiles, Using Simple Image Processing
この論文をさがす
説明
It is very often that top fillet profiles of Pb free solder connected with QFP (Quad Flat Package) leads fluctuate more than those of Pb eutectic solder and have coarse surface roughness. The fluctuation and surface roughness make it difficult to carry out the feature extraction of the top fillet. The purpose of the present study is, therefore, to extract the top fillet profile characteristics using a simple image processing.<br>Pb free solder used in the present study was Sn-3.5Ag-0.7Cu. QFP leads plated with Sn-10Pb or Au/Pd/Ni were used as an inspection object. As a prior work, we investigated an appropriate observing direction, that is, the camera angle to obtain highlight in the vicinity of the top fillet (the side of QFP lead edge) and the distribution (fluctuation) of the camera angle were examined, because the camera angle was closely related with the wetting angle at the top fillet. The good profiles of the top fillet could be judged, i.e., the top fillet profiles with a proper wetting angle were decided by whether or not a certain highlight area (island) was observed. It was found that the judgement was possible if the size of the island (number of pixels with level 1 after binarization) was adequately regulated.
収録刊行物
-
- 高温学会誌
-
高温学会誌 30 (1), 24-32, 2004
一般社団法人 スマートプロセス学会 （旧高温学会）
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681406711808
-
- NII論文ID
- 130004471092
-
- COI
- 1:CAS:528:DC%2BD2cXjvFCnsLY%3D
-
- ISSN
- 03871096
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可