Cold-model Experiments on Deadman Renewal Rate Due to Sink-Float Motion of Hearth Coke Bed

DOI Web Site 被引用文献4件 参考文献12件 オープンアクセス
  • Nogami Hiroshi
    Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
  • Toda Katsuya
    Graduate School of Engineering, Tohoku University
  • Pintowantoro Sungging
    Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
  • Yagi Jun-ichiro
    Institute of Multidisciplinary Research for Advanced Materials, Tohoku University

この論文をさがす

説明

With increase in pulverized coal injection rate to blast furnace, renewal behavior of deadman has been attracting much interests. This paper focuses on the renewal rate of the deadman induced by the sink-float motion of hearth coke bed, and it is discussed through cold-model experiments using half-cut model of blast furnace. Trajectories of packed particles in the deadman zone are converted into the transient velocity field, and further to the distribution of time required for particle transferring to the raceway zone. With this distribution the renewal rate of the deadman is quantitatively discussed. As the results, it is revealed that increase in the amount of accumulated water in the hearth, shallower hearth depth, and increase in gas flow rate make the discharging time of particles in the deadman zone shorter, and this tendency is explained by the height of sink-float motion of the hearth packed bed. About ten percent of particles that are discharged from the raceway passes through the deadman zone in the standard condition of this study. The particle movement induced by the sink-float motion of hearth packed bed is indispensable mechanism in the evaluation of deadman renewal.

収録刊行物

被引用文献 (4)*注記

もっと見る

参考文献 (12)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ