書誌事項
- タイトル別名
-
- Preparation of Metal-polymer Hybrid Films by Electroless Plating of Honeycomb Structures
- ハニカム コウゾウ ノ ムデンカイ メッキ ニ ヨル キンゾク コウブンシ フクゴウ マク ノ サクセイ
この論文をさがす
抄録
Several types of metal-polymer hybrid films were prepared by electroless plating of self-organized honeycomb-patterned polymer films. The polystyrene honeycomb film was fabricated by a template method of hexagonally ordered condensed water droplets, and composed of a micrometric porous array and nanometric pillar structures that hold top and bottom porous layers together. Chemical adhesion of palladium catalysts for nickel electroless plating was controlled by difference of wettability of the honeycomb structures. After electroless plating and peeling off the top layer of the honeycomb film, various kinds of the metal-polymer hybrid films such as metal-coated honeycomb-patterned polymer films, metal-coated pillar-structured polymer films, ring-like-structured metal in the honeycomb-patterned polymer film, ball-like-structured metal array in the honeycomb-patterned polymer film, and dome-like-structured metal in the pillar-structured polymer film were obtained.
収録刊行物
-
- 表面科学
-
表面科学 31 (7), 359-363, 2010
公益社団法人 日本表面科学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681435878016
-
- NII論文ID
- 130004486611
- 10026871919
-
- NII書誌ID
- AN00334149
-
- ISSN
- 18814743
- 03885321
-
- NDL書誌ID
- 10771601
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可