Pbフリーはんだによるこて先の消耗

書誌事項

タイトル別名
  • Consumption of Soldering Iron by Pb-Free Solder

抄録

  The consumption of soldering iron was examined using Pb-free solder and the solder/soldering iron reaction was discussed in connection with the kinetics. The consumption of soldering iron increased with an increase in solder/soldering iron contact time. When the fused solder was removed by compressed air cleaning, no thick reaction layer was observed at the solder/soldering iron interface. When the fused solder remained on the surface of the soldering iron after such cleaning, a thick reaction layer was observed. As fused solder was held for a long time on the surface of the soldering iron, a thick FeSn2 reaction layer of was formed at the solder/soldering iron interface. The rate of formation of the reaction layer seemed to be controlled by the diffusion of iron through the reaction layer. The reaction layer was relatively hard (Hv 378) and had many voids. It was possible to remove the reaction layer by compressed air cleaning. On the basis of these results, it is clear that the soldering iron consumption due to Pb-free solder occurs according to the mechanism of the formation of a reaction layer of about 30 nm thickness through one soldering process, followed by flaking away with compressed air cleaning.<br>

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 69 (9), 848-854, 2005

    公益社団法人 日本金属学会

被引用文献 (4)*注記

もっと見る

参考文献 (3)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ