大気中におけるβ‐FeSi2焼結体の高温酸化

書誌事項

タイトル別名
  • High-Temperature Oxidation of Sintered .BETA.-FeSi2 Bodies at Elevated Temperatures
  • 大気中におけるβ-FeSi2焼結体の高温酸化
  • タイキ チュウ ニ オケル ベータ FeSi2 ショウケツタイ ノ コウオン サンカ
  • High-Temperature Oxidation of Sintered β-FeSi2 Bodies at Elevated Temperatures

この論文をさがす

抄録

  β-FeSi2, which is one of the thermoelectric materials, has been more attractive in high-temperature range because of its low cost of raw materials. Oxidation resistance of sintered β-FeSi2 was investigated at temperatures ranging from 1073 to 1223 K in air. Fully densified and porous β-FeSi2 samples were fabricated by using the pulsed electric current sintering method. They were annealed at 1173 K for 5d to obtain β-FeSi2 phase. Microstructure of oxidized sample was observed by scanning electron microscopy with energy dispersion X-ray spectroscopy. Phase identification of samples oxidized was carried out by X-ray diffraction. Oxide layer, which is most likely an amorphous SiO2, was formed on β-FeSi2 samples after oxidation. Growth of the oxide layer obeyed a parabolic law. Growth rate of the oxide layer on sintered β-FeSi2 was comparable to that of Si. Granular ε-FeSi was developed below the oxide layer as a result of oxidation of β-FeSi2. Grain boundary oxidation was not observed. Formation of cracks in the SiO2 layer and β-FeSi2 was not observed even in on the porous samples. Oxidation resistance of sintered β-FeSi2 was excellent for high-temperature thermoelectric applications.<br>

収録刊行物

被引用文献 (3)*注記

もっと見る

参考文献 (32)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ