耐食軽合金鋳物の静置腐食および応力腐食割れについて

DOI Web Site Web Site

書誌事項

タイトル別名
  • Studies on Statical and Stress Corrosion of Corrosion-Resistant Al Casting Alloys
  • タイショク ケイゴウキン イモノ ノ セイチフショク オヨビ オウリョク フショク ワレ ニ ツイテ

この論文をさがす

抄録

In practical use, it is often observed that the corrosion resistance of light alloys cannot be estimated only by the results of statical corrosion test. Although a number of investigators have studied the problem of corrosion of Al casting alloys, few systematical researches under different conditions have been carried out. In this report, statical and stress corrosion tests were carried out with 5%Mg-Al casting (AC7A), 10%Mg-Al casting (AC7B) and K.S. Seewasser alloys. The results obtained are summarized as follows: (1) AC7B alloy is superior to AC7A and K.S. alloys in the statical corrosion test. (2) When the stress is applied in a corrosive environment, AC7B is more prone to stress-corrosion cracking than AC7A and K.S. alloys. This tendency is promoted by the β-phase precipitation treatment. (3) Cathodic protection is effective for these alloys to prevent the stress-corrosion cracking.

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 24 (5), 300-304, 1960

    公益社団法人 日本金属学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ