SbおよびSi入りPb合金の押出性について

DOI Web Site Web Site

書誌事項

タイトル別名
  • On Extrusion Properties of Lead Alloys Added with Antimony and Silicon
  • Sb オヨビ Si イリ Pb ゴウキン ノ オシダシセイ ニ ツイテ

この論文をさがす

抄録

The authors studied the effect of antimony and silicon inlead on the extrusion and mechanical properties of extruded rods under different extrusion temperatures. The following results were obtained. In the extrusion process at room temperature, the extrusion pressure and the tensile strength of extruded rods increased with increase of antimony and silicon contents in lead, and the elongation decreased. These remarkable inclinations were apparent in the range of 0.3∼0.7% antimony contents and in the extrusion temperature between 100° and 150° in lead-antimony alloys as well as lead-antimony-silicon alloys. However, these effects of antimony and silicon were weakened with rising extrusion temperature. The rods extruded at room temperature showed age-softening, while these extruded by hot-working showed age-hardening.

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 24 (8), 487-490, 1960

    公益社団法人 日本金属学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ