低温焼結接合のための酸化銀および酸化銅混合ペーストを用いた銅継手の接合性評価

  • 小椋 智
    大阪大学大学院工学研究科マテリアル生産科学専攻
  • 柳下 朋大
    大阪大学大学院工学研究科マテリアル生産科学専攻
  • 高田 慎也
    大阪大学大学院工学研究科マテリアル生産科学専攻
  • 藤本 智之
    大阪大学大学院工学研究科マテリアル生産科学専攻
  • 廣瀬 明夫
    大阪大学大学院工学研究科マテリアル生産科学専攻

書誌事項

タイトル別名
  • Bondability of Copper Joints Formed Using a Mixed Paste of Ag<sub>2</sub>O and CuO for Low-Temperature Sinter Bonding
  • テイオン ショウケツ セツゴウ ノ タメ ノ サンカギン オヨビ サンカ ドウ コンゴウ ペースト オ モチイタ ドウ ツギテ ノ セツゴウセイ ヒョウカ
  • Bondability of Copper Joints Formed Using a Mixed Paste of Ag2O and CuO for Low-Temperature Sinter Bonding

この論文をさがす

抄録

  The bondability of copper joints formed using a mixed paste of silver oxide (Ag2O) and copper oxide (CuO) that contained reducing solvents was evaluated in order to achieve bonds that exhibited high migration tolerance and could serve as Pb-free alternatives to the conventional bonds formed using high-melting point solders in electronics packaging. The Ag2O particles reduced into silver nanoparticles at 150℃, whereas the CuO reduced into copper nanoparticles about 300℃. The joints formed using the Ag2O/CuO mixed paste, when heated to the appropriate levels, exhibited bondability superior to that of conventional Pb-5Sn joints. The oxide film formed on the copper substrate was reduced by the combustion of polyethylene glycol 400, and bonding was achieved between the sintered layer and the copper substrate. A longer period resulted in the oxidisation of a few layers of sintered copper layers into Cu2O. The ion-migration tolerance of the Ag2O/CuO mixed paste was approximately four times that of a layer of pure sintered silver.<br>

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 78 (7), 280-285, 2014

    公益社団法人 日本金属学会

参考文献 (23)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ