素材組織の異なる炭素鋼のオーステナイト化過程について

DOI Web Site Web Site

書誌事項

タイトル別名
  • The Structure Dependence on the Austenizing Process of 0.68% Carbon Steel
  • ソザイ ソシキ ノ コトナル タンソ コウ ノ オーステナイトカ カテイ ニ ツイテ

この論文をさがす

抄録

The course of transformation of 0.68% carbon steel after rapid heating to austenizing temperatures has been investigated using hardness measurement and microscopic and dilatation techniques. The steel specimens used for the investigation have the structures with lamellar, and spheroidized pearlites and the structure consisting of spheroidized pearlite with graphite nodule. The rate of austenite formation for the lamellar pearlites is greater than the spheroidized pearlites and a finer pearlite gives a more rapid transformation than a coarse one, and when the spheroidized specimen contained graphite, a very long time is necessary for arriving at an austenite state of equilibrium. The austenizing curves obtained from hardness measurement of spheroidized specimens show a sigmoid shape, on the other hand, the austenizing for the lamellar specimens is completed more quickly after a certain incubation period. The explanation of time required to complete the transformation for the structural variables as a function of ferrite-cementite interfacial area is not sufficiently conclusive.

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 24 (12), 805-809, 1960

    公益社団法人 日本金属学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ