無酸素銅の冷間加工直後からの低温焼鈍効果について

DOI Web Site Web Site

書誌事項

タイトル別名
  • On the Effect of Low-Temperature Annealing after Cold Working of OFHC Copper
  • ムサンソ ドウ ノ レイカン カコウ チョクゴ カラ ノ テイオン ショウドン コウカ ニ ツイテ

この論文をさがす

抄録

In some cold-worked metals and alloys, extraordinary hardening occurs by annealing at lower temperature than their recrystallization temperature. The hardening phenomena of purest Ni, Al, Cu, Ag and Fe have been reported, but their mechanism has not been studied sufficiently. In the experiment of this report, anomalous phenomena of isothermal change in the region from 10 to 400°C were observed by electric resistivity method in vacuum. The experimental results may be summarized as follows: (1) In the specific resistance-time curve, OFHC copper showed anomalous changes of electric resistance at each annealing temperature, and the shape of curve of the change became sharp in proportion as the reduction was increased. (2) The extinction time of peak of this change became longer in proportion as the reduction was heightened. (3) There was no linear relation among the reciprocal of absolute temperature of annealing, extinction time of peak, and the beginning time of the 1st and 2nd peaks.

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 25 (3), 210-212, 1961

    公益社団法人 日本金属学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ