可鍛鋳鉄の内部摩擦とヤング率

書誌事項

タイトル別名
  • Internal Friction and Young’s Modulus in Malleable Cast Iron
  • カタンチュウテツ ノ ナイブ マサツ ト ヤングリツ
  • Internal Friction and Young’s Modulus in Malleable Cast Iron

この論文をさがす

抄録

Changes in internal friction and Young’s modulus with the graphitization of malleable cast iron were investigated. The effects of strain-amplitude, the structures of the matrix, the content of graphite, the size and the shape of the graphite nodules were described and discussed. In the as-cast state internal friction was quite low and no amplitude dependence was observed for strains of less than 10−5, while the Young’s modulus was comparatively high. As the specimens, however, were heated to graphitize, internal friction became higher and reached a final value at the end of the graphitization. On the contrary the Young’s modulus decreased by a considerable amount with the graphitization. In the graphitized state the internal friction showed a well-defined amplitude dependence, that is, it increases linearly with the strain-amplitude. By this observation, the cause of internal friction in annealed malleable cast iron is considered to be caused by the magneto-mechanical static hysteresis in ferrite. The notch effect of graphite nodules may cause a local stress concentration and bring about an increase in static hysteresis.

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 25 (7), 448-452, 1961

    公益社団法人 日本金属学会

被引用文献 (2)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ