溶体化処理した高Mn鋼の加熱によるε相の生成

書誌事項

タイトル別名
  • On the ε-Phase Formation in Solution-treated and Heated Hadfield Steel
  • ヨウタイカ ショリ シタ コウMn コウ ノ カネツ ニ ヨル イプシロンソウ ノ セイセイ
  • On the ε-Phase Formation in Solution-treated and Heated Hadfield Steel

この論文をさがす

抄録

The effect of isothermal heating on the ε-phase formation in solution-treated standard Hadfield steel was studied. When solution-treated Hadfield steel was heated isothermally at some temperature range, it precipitated a large quantity of grain-boundary carbides and pearlitic constituents. Consequently, the carbon content in the γ-phase decreased, then the γ-phase was transformed to ε-phase after the specimens were cooled to room temperature. The isothermal temperature range of steels containing the ε-phase at room temperature shaped a C-curve which has the nose of 500°×5 hr and extending over the temperature range of 450∼625°. This range corresponds to the range in which a large quantity of pearlitic constituents were precipitated. The existence of the ε-phase in steels at room temperature was observed in both the microstructure and the X-ray diffraction pattern. This ε-phase was transformed to the γ-phase when the specimens were heated at 200∼280°,and this transformation was confirmed as a remarkable expansion in the thermal dilatation curve.

収録刊行物

被引用文献 (1)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ