Reduction of Wustite in Oxygen-Potential Gradient
-
- Iguchi Yoshiaki
- Department of Metallurgical Engineering, Nagoya Institute of Technology
-
- Yamanami Hirofumi
- Graduate Student, Nagoya Institute of Technology
-
- Hirao Jiro
- Department of Metallurgical Engineering, Nagoya Institute of Technology
Bibliographic Information
- Other Title
-
- 酸素ポテンシャル勾配下におけるウスタイトの還元
- サンソ ポテンシャル コウバイカ ニ オケル ウスタイト ノ カンゲン
Search this article
Description
This study was performed to ascertain the authors’ consideration that the magnitude of the flux of cation vacancy diffusing into the reaction interface may determine the morphology of reduced iron. Wustite plates of about 1.5 mm thickness and wustite foils produced by the unidirectional oxidation of iron foils of 200, 70 and 25 μm thicknesses in situ were used as specimens. In the reduction of wustite plates, pores were formed in wustite before iron formation, and thereafter iron was formed on the pores. A region of the highest reduction degree was located not on the exterior surface in contact with the reducing gas but in a place distant from the surface. In the reduction of wustite foils, the reaction interface receiving the in-flux of vacancies advances much more rapidly than that not receiving it. The effect of cation vacancies diffusing into the interface on the distance between iron nuclei and the elongation rate of pores in wustite was discussed.
Journal
-
- Journal of the Japan Institute of Metals and Materials
-
Journal of the Japan Institute of Metals and Materials 49 (5), 351-356, 1985
The Japan Institute of Metals and Materials
- Tweet
Details 詳細情報について
-
- CRID
- 1390282681460456960
-
- NII Article ID
- 130007336037
-
- NII Book ID
- AN00187860
-
- ISSN
- 18806880
- 24337501
- 00214876
-
- NDL BIB ID
- 3033840
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed