Tensile Properties of Electron-Beam-Welded Single Crystals of Molybdenum
-
- Hiraoka Yutaka
- Tsukuba Laboratories, National Research Institute for Metals
-
- Okada Masatoshi
- Tsukuba Laboratories, National Research Institute for Metals
-
- Irie Hirosada
- National Research Institute for Metals
-
- Fujii Tadayuki
- National Research Institute for Metals
Bibliographic Information
- Other Title
-
- 電子ビーム溶接したモリブデン単結晶の引張特性
- デンシ ビーム ヨウセツシタ モリブデン タンケッショウ ノ ヒッパリ トクセ
Search this article
Abstract
The purpose of this study is to investigate the macro- and microstructures and the tensile properties of electron-beam-welded single crystals of molybdenum. The single-crystal sheets were prepared by means of secondary recrystallization. The welding was carried out by a melt-run technique.<BR>The weld metal had the same crystallographic orientation as the base metal, and no grain boundary was observed. However, many large weld pores were formed mostly along the weld bond. The strength and ductility of the welded joints of single crystals were almost the same as those of the base metal (“annealed” single crystals). It is concluded that the joint efficiency of molybdenum single crystals at room temperature or above was excellent and nearly 100%.
Journal
-
- Journal of the Japan Institute of Metals and Materials
-
Journal of the Japan Institute of Metals and Materials 51 (5), 407-412, 1987
The Japan Institute of Metals and Materials
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390282681461361152
-
- NII Article ID
- 130007337613
-
- NII Book ID
- AN00187860
-
- ISSN
- 18806880
- 24337501
- 00214876
-
- NDL BIB ID
- 3133537
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed