18クロム・ステンレス鋼の2次加工性に関する研究

DOI Web Site Web Site

書誌事項

タイトル別名
  • Study on the Secondary-Workability of 18% Chromium Stainless Steel
  • 18 クロム ステンレス コウ ノ 2ジ カコウセイ ニ カンスル ケンキュウ

この論文をさがす

抄録

This investigation was carried out on the r-value of the 18% chromium stainless steel, to obtain a fundamental knowledge of the secondary-workability.<BR>The results obtained are as follows:<BR>(1) The r-values of the fracture points of AISI type 430 stainless steel annealed specimens are constant and are not affected by strain rate.<BR>(2) The r-values of the {001}⟨110⟩ regions in the specimens compressed to the III stage region (\dotε=0.0325/sec, ε=0.4, n=0.34) become the increasing function of strain, while the r-values of the specimens compressed in the II stage region (\dotε=0.0325/sec, ε=<0.062, n=1.006) become the decreasing function of strain after the maximum point at the ε=0.1.<BR>(3) The r-values of the specimens stretched in the TD direction in the II stage region (\dotε=0.0325/sec, ε=0.07) are constant for the whole strain regions and have no strain rate dependence.<BR>(4) The r-values of the specimens compressed in the II stage region (\dotε=38.3/sec, ε=0.07, n=0.855) are slightly affected by texture.

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 36 (9), 913-920, 1972

    公益社団法人 日本金属学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ