Mn-Ni-Fe系非磁性エリンバー型合金について

書誌事項

タイトル別名
  • Nonmagnetic Elinvar-Type Alloys in the Mn-Ni-Fe System
  • Mn-Ni-Feケイ ヒジセイ エリンバーカタ ゴウキン ニ ツイテ

この論文をさがす

抄録

Measurements of Young’s modulus at −150∼400°C and rigidity modulus, thermal expansion and hardness at room temperature have been carried out with Mn-Ni-Fe alloys subjected to a various procedures of heat treatment and cold working. In Young’s modulus vs temperature curves, the ternary alloys slowly cooled after heating for 1 hr at 950°C showed distinct anomalous changes related to the antiferromagnetic\ ightleftarrowsparamagnetic transformation. Young’s modulus at room temperature showed no remarkable difference by the annealed, cold worked or water quenched states, but the value tended to increase with increasing manganese or iron contents. The temperature coefficient of Young’s modulus showed a wide variation with annealing, water quenching, cold working, and reheating after water quenching or cold working, and also with alloy composition. The temperature coefficient of Young’s modulus as a function of composition exhibited a large positive maximum, thus showing the Elinvar property. The variations in rigidity modulus and its temperature coefficient showed a close similarity to those in Young’s modulus and its temperature coefficient. The hardness showed a very complicated change with the process of heat treatment, cold reduction rate and alloy composition, showing the Vickers hardness of about 100 to 900. Further, the corrosion resistance of Mn-Ni-Fe alloys is fairly large.

収録刊行物

  • 日本金属学会誌

    日本金属学会誌 36 (9), 886-890, 1972

    公益社団法人 日本金属学会

被引用文献 (4)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ