Evaluation of Superplastic Characteristics by means of Tensile Test of R-type Specimen

DOI Web Site Web Site
  • Furushiro Norio
    Department of Materials Science and Engineering, Faculty of Engineering, Osaka University
  • Takayama Yoshimasa
    Deparment of Mechanical Systems Engineering, Faculty of Engineering, Utsunomiya University
  • Tozawa Tatsumi
    Deparment of Mechanical Systems Engineering, Faculty of Engineering, Utsunomiya University
  • Kato Hajime
    Deparment of Mechanical Systems Engineering, Faculty of Engineering, Utsunomiya University
  • Ono Kazuto
    Deparment of Mechanical Systems Engineering, Faculty of Engineering, Utsunomiya University

Bibliographic Information

Other Title
  • R型試験片を用いた引張試験による超塑性特性の評価
  • Rガタ シケンヘン オ モチイタ ヒッパリ シケン ニ ヨル チョウソセイ ト

Search this article

Abstract

In order to evaluate the basic characteristics of superplastic materials, an R-type specimen has been proposed, which has no ordinary gauge part of a uniform cross section.<BR>First, the fundamental problems of a conventional evaluation method have been pointed out. Then, the superplastic characteristics of a Zn-Al eutectoid superplastic alloy have been examined to investigate the possibility of the new evaluation method using the R-type specimen.<BR>As a result, it is found that the R-type specimen has the excellent possibility. In particular, the extremely high elongation can be estimated from a peak value of strain distribution after fracture. Moreover, true stress versus true strain rate relation and m-value in a wide range of strain rate can be derived from the results for a pair of R-type specimens.

Journal

Keywords

Details 詳細情報について

Report a problem

Back to top