Welding of Thin Steel Plates by Hybrid Welding Process Combined TIG Arc with YAG Laser
-
- KIM Taewon
- Graduate School of Keio University
-
- SUGA Yasuo
- Faculty of Science and Technology, Keio University
-
- KOIKE Takashi
- Graduate School of Keio University
この論文をさがす
説明
TIG arc welding and laser welding are used widely in the world. However, these welding processes have some advantages and problems respectively. In order to improve problems and make use of advantages of the arc welding and the laser welding processes, hybrid welding process combined the TIG arc with the YAG laser was studied. Especially, the suitable welding conditions for thin steel plate welding were investigated to obtain sound weld with beautiful surface and back beads but without weld defects. As a result, it was confirmed that the shot position of the laser beam is very important to obtain sound welds in hybrid welding. Therefore, a new intelligent system to monitor the welding area using vision sensor is constructed. Furthermore, control system to shot the laser beam to a selected position in molten pool, which is formed by TIG arc, is constructed. As a result of welding experiments using these systems, it is confirmed that the hybrid welding process and the control system are effective on the stable welding of thin stainless steel plates.
収録刊行物
-
- JSME International Journal Series A Solid Mechanics and Material Engineering
-
JSME International Journal Series A Solid Mechanics and Material Engineering 46 (3), 202-207, 2003
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681471003392
-
- NII論文ID
- 10016191330
-
- NII書誌ID
- AA11179396
-
- COI
- 1:CAS:528:DC%2BD3sXns1eqsr0%3D
-
- ISSN
- 13475363
- 13447912
-
- NDL書誌ID
- 6602073
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可