Fracture Toughness of Cemented Carbide for Cold Forging Die
-
- WANG Zhigang
- 岐阜大学工学部
-
- LI Haojie
- 岐阜大学大学院工学研究科
-
- SHIRAGA Hiroaki
- NTN 株式会社生産技術研究所
Bibliographic Information
- Other Title
-
- 冷間鍛造金型用超硬合金の破壊じん性
- レイカン タンゾウ カナガタヨウ チョウコウゴウキン ノ ハカイジンセイ
Search this article
Abstract
The fracture toughness of cemented carbide for cold forging dies is necessary for predicting the fracture of a die insert. It is generally measured by the hardness indentation method. In the present study, it was measured by the three-point bending test using a test piece with a precrack generated by the EC method. Seven types of cemented carbide were used. It was found that the fracture toughness increases with an increase in WC grain size or Co mass percent. It was also found that the bending test using a test piece with a precrack gives good results compared with the hardness indentation method. It was shown that cemented carbides could be destroyed macroscopically under a 160 MPa tensile stress as analyzed by FEM simulation using a test piece model without a precrack.
Journal
-
- Journal of the Japan Society for Technology of Plasticity
-
Journal of the Japan Society for Technology of Plasticity 54 (628), 441-445, 2013
The Japan Society for Technology of Plasticity
- Tweet
Details 詳細情報について
-
- CRID
- 1390282681475721088
-
- NII Article ID
- 10031159284
-
- NII Book ID
- AN00135062
-
- COI
- 1:CAS:528:DC%2BC3sXht1SisL7E
-
- ISSN
- 18820166
- 00381586
-
- NDL BIB ID
- 024676956
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed